Air Beds

A slight drop in firmness during the first few uses is normal as the material stretches and adapts. After that, a properly inflated air bed should hold air throughout the night. Add a little air if needed to maintain your preferred firmness.

Our air beds combine supportive air chambers with a reinforced internal matrix structure to deliver stable, non-sagging support similar to a traditional mattress. Designed to support up to 300 kg / 660 lb, they provide a balanced, restful sleep experience. The plush PVC top adds a soft, velvety feel while maintaining long-lasting durability.

Sharp objects such as pet claws, rocks, or rough surfaces may puncture the material. To extend the lifespan, we recommend placing a protective sheet, blanket, or ground mat underneath the air bed. Our upgraded version also includes optional accessories such as a fitted cover and blanket, which provide an extra layer of protection while enhancing comfort and durability.

Single: up to 330 lbs (150 kg)

Full / Queen / Double: up to 660 lbs (300 kg)

Our air beds can be fully inflated in 2-3 minutes with a powerful built-in or electric pump; inflation time may vary slightly depending on the pump power.

Yes, many of our customers use them for guests, camping trips, and temporary bedding.

1. Make sure the deflation valve is tightly closed.
2. Open the sealing cap of the built-in air pump.
3. Double-click the power switch to start inflating the air bed.
4. The air bed will be fully inflated in about 3 minutes.
5. Press the power switch again to stop the pump once the mattress reaches your desired firmness.
6. Close and tighten the sealing cap to complete the inflation.
   

For detailed instructions, please refer to the illustrated manual

1. Remove the air pump from the bed.
2. Attach the large nozzle to the deflation port of the air pump.
3. Open the second layer of the deflation valve on the air bed. The mattress will begin to slowly release air automatically.
4. Double-click the power switch to start the pump.
5. Insert the pump nozzle into the deflation valve to begin actively deflating the air bed.
6. Once the air bed is completely deflated, unplug the air pump and press the switch to stop the pump.
   

For more illustrated instructions and packing details, please refer to the manual.